logo

Best Excavators

ranking Cover image

The best excavator depends heavily on the job. This list mixes 16-ton wheeled excavators with 30–40-ton crawler machines and 50-ton production excavators, so the ranking considers more than raw digging force. Productivity, fuel efficiency, versatility, current technology, transport requirements, and suitability across real construction work all carry weight.

The Hitachi ZX350 ranks first for its strong balance of power, operating weight, digging force, and current ZAXIS-7G technology. The Doosan DX300LC follows as a highly efficient 30-ton-class machine, while the Volvo EC480 and Hitachi ZX470LC bring significantly more capacity for heavy excavation. For the supplied Doosan DX300LC, current technical reference is based on the latest DX300LC-7K platform now marketed by Develon.

Table of contents

01

Hitachi ZX350 Medium excavators
2006-2012

Generation--cover

The Hitachi ZX350 combines a 35.02-ton operating weight, 239 kN bucket digging force, and 11.1 m reach for bulk excavation and heavy construction work. Compared with the Cat 323 and Komatsu PC300, it offers a heavier working platform and strong breakout performance, but requires more transport capacity and working space.

Overview

The Hitachi ZX350 (ZX350LC-3) (2006–2012) is a 35.02-ton medium excavator aimed at contractors, quarry operators, road crews, and earthmoving fleets that require strong digging force and useful working reach. Its 202 kilowatt turbocharged Isuzu AH-6HK1XYSA-01 engine, 1.15 cubic meter bucket, 7.38 m digging depth, and 11.1 m reach make it suitable for bulk excavation, foundations, truck loading, road construction, quarry support, and general site development.

Expert rating: 5 stars

Pros Strong bucket digging force and high hydraulic flow support demanding excavation and loading work.
Cons Modest bucket capacity for its operating weight can limit production in high-volume loading work.

Performance & Efficiency

The 202 kilowatt Isuzu AH-6HK1XYSA-01 turbocharged engine supports a hydraulic pump flow of 580.2 liters per minute at a relief pressure of 343 bar. Its 239 kN bucket digging force provides strong breakout performance in compacted soil and heavy material, while the 106 kN arm crowding force supports trenching and loading cycles. The 178 kN drawbar pull and 35-degree gradeability help the machine work across uneven ground, while the 10.7 rpm swing speed supports responsive excavation and truck loading.

In Comparison

Cat 323: A lighter and easier-to-transport excavator for general construction, with lower site and transport requirements.
Komatsu PC300: A closely positioned alternative for bulk excavation and truck loading, with similar suitability for medium-to-heavy construction work.
Hitachi ZX350: Provides a heavier 35.02-ton platform, 239 kN bucket digging force, and 580.2-liter-per-minute hydraulic flow for demanding excavation and quarry-support applications.

Final Verdict

Rated 5 stars, the Hitachi ZX350 is a capable medium excavator within the AED 120,000–240,000 range. Its strong digging force, high hydraulic output, useful reach, and substantial operating weight make it suitable for bulk earthmoving, foundations, quarry support, and road projects, although buyers should inspect the hydraulic system, undercarriage, swing components, and service history carefully due to its age.

1.15 cu m Bucket capacity
202 kw Gross power
7,380 mm Max digging depth
11,100 mm Max digging reach
7,150 mm Max dump height
35,020 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 3

Market average

AED 240,000

Starting from

AED 120,000
See owner ratings
02

Doosan DX300LC Medium excavators
2017-2023

Generation-حفارات متوسطة دوسان DX300LC-cover

The Doosan DX300LC combines a 30.9-ton operating weight, 199 kN bucket digging force, and a 1.5 cubic meter bucket for heavy excavation and high-volume earthmoving. Compared with the smaller Cat 320 and closely matched Komatsu PC300, it offers strong hydraulic output, long working reach, and a practical balance of digging power and capacity.

Overview

The Doosan DX300LC (2017–2023) is a 30.9-ton medium excavator aimed at contractors, quarry operators, and earthmoving fleets that need high digging forces and useful bucket capacity for demanding work. Its 147 kilowatt turbocharged Doosan DL08K engine, 1.5 cubic meter bucket, 7.3 m digging depth, and 10.55 m reach make it suitable for bulk excavation, foundations, trenching, loading, quarry support, and major site preparation.

Expert rating: 5 stars

Pros Strong bucket and arm forces, with high hydraulic flow and a useful 1.5 cubic meter bucket.
Cons Heavy transport requirements and higher fuel demand make it excessive for smaller excavation jobs.

Performance & Efficiency

The 147 kilowatt Doosan DL08K turbocharged engine supports a hydraulic pump flow of 494.32 liters per minute at a relief pressure of 323.62 bar. Its 199 kN bucket digging force and 136.31 kN arm crowding force provide strong breakout performance in compacted ground and bulk excavation, while the 247.13 kN drawbar pull and 35-degree gradeability support movement across difficult sites. The 9.9 rpm swing speed helps maintain steady truck-loading and excavation cycles.

In Comparison

Cat 320: A smaller alternative that is easier to transport and better suited to general construction, but provides less operating weight and bucket capacity than the Doosan DX300LC.
Komatsu PC300: A closer competitor in operating class, suited to heavy excavation, quarry support, and high-volume earthmoving.
Doosan DX300LC: Combines a 30.9-ton platform, 199 kN bucket force, and 494.32-liter-per-minute hydraulic flow for demanding production work.

Final Verdict

Rated 5 stars, the Doosan DX300LC is a strong medium excavator within the AED 300,000–550,000 range. Its powerful hydraulic system, 1.5 cubic meter bucket, long digging reach, and high drawbar pull make it a practical option for bulk excavation, quarry work, foundations, and large site-development projects.

1.5 cu m Bucket capacity
147 kw Gross power
7,300 mm Max digging depth
10,550 mm Max digging reach
7,250 mm Max dump height
30,900 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 4

Market average

AED 550,000

Starting from

AED 300,000
See owner ratings
03

Volvo EC480 Large excavators
2011-2017

Generation--cover

The Volvo EC480 combines a 53.1-ton operating weight, 251 kN bucket digging force, and a 3.8 cubic meter bucket for bulk excavation, quarry work, and high-volume loading. Compared with the Cat 349 and Hitachi ZX470LC, it offers greater stated bucket capacity and long working reach, with strong hydraulic pressure for demanding production sites.

Overview

The Volvo EC480 (EC480DL) (2011–2017) is a 53.1-ton large excavator aimed at quarry operators, major contractors, mining support fleets, and earthmoving companies that need long reach and high loading capacity. Its 265 kilowatt turbocharged Volvo D13H engine, 3.8 cubic meter bucket, 9.2 m digging depth, and 13.26 m reach make it suitable for bulk excavation, quarry production, deep foundations, large-truck loading, demolition preparation, and major site-development work.

Expert rating: 5 stars

Pros Large bucket capacity, long digging reach, and strong hydraulic pressure support high-volume production.
Cons Heavy transport requirements and high fuel and undercarriage costs limit its use on smaller projects.

Performance & Efficiency

The 265 kilowatt Volvo D13H turbocharged engine supports a hydraulic pump flow of 716 liters per minute at a relief pressure of 353 bar. Its 251 kN bucket digging force and 174 kN arm crowding force provide useful breakout performance in dense soil and bulk excavation, while the 333 kN drawbar pull and 35-degree gradeability support movement across difficult ground. The 8.8 rpm swing speed maintains controlled loading and excavation cycles despite the machine’s 53.1-ton operating weight.

In Comparison

Cat 349: A closely matched large excavator for quarry, demolition, and bulk earthmoving work, with a strong production platform and broad service support.
Hitachi ZX470LC: Offers higher stated bucket and arm digging forces, with similarly deep digging capability and heavy transport requirements.
Volvo EC480: Combines a 3.8 cubic meter bucket, 13.26 m reach, 353-bar hydraulic pressure, and a 53.1-ton platform for high-volume excavation and loading.

Final Verdict

Rated 5 stars, the Volvo EC480 is a capable large excavator within the AED 245,000–450,000 range. Its large bucket, long working reach, strong hydraulic pressure, and substantial traction make it a practical choice for quarries, deep foundations, bulk excavation, and major earthmoving projects where production justifies the higher transport and operating costs.

3.8 cu m Bucket capacity
265 kw Gross power
9,200 mm Max digging depth
13,260 mm Max digging reach
7.96 mm Max dump height
53,100 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 5

Market average

AED 450,000

Starting from

AED 245,000
See owner ratings
04

Kobelco SK380 Medium excavators
2022-2026

Generation-حفارات متوسطة كوبيلكو SK380-cover

The Kobelco SK380 combines a 38.5-ton operating weight, 252 kN bucket digging force, and a 1.9 cubic meter bucket for heavy excavation and high-volume earthmoving. Compared with the smaller Hyundai R220 and Kobelco SK200, it delivers substantially greater hydraulic output, reach, digging force, and production capacity for major projects.

Overview

The Kobelco SK380 (SK380XDLC-10) (2022–2026) is a 38.5-ton medium excavator aimed at contractors, quarry operators, and earthmoving fleets that require high digging forces, long reach, and strong loading capacity. Its 209 kilowatt Hino J08E-UN engine, 1.9 cubic meter bucket, 7.56 m digging depth, and 11.26 m reach make it suitable for bulk excavation, quarry support, deep foundations, truck loading, demolition preparation, and major site-development work.

Expert rating: 5 stars

Pros High digging forces and hydraulic flow, with a 1.9 cubic meter bucket for strong loading production.
Cons Heavy transport and fuel requirements make it excessive for routine general-construction work.

Performance & Efficiency

The 209 kilowatt Hino J08E-UN engine supports a hydraulic pump flow of 609 liters per minute at a relief pressure of 343 bar. Its 252 kN bucket digging force and 165 kN arm crowding force provide strong breakout performance in compacted material and heavy excavation, while the 331 kN drawbar pull and 35-degree gradeability support movement across difficult ground. The 10 rpm swing speed helps maintain steady truck-loading and excavation cycles despite the machine’s heavy operating weight.

In Comparison

Hyundai R220: A lighter and easier-to-transport excavator for general construction, but it offers less bucket capacity, hydraulic flow, digging force, and working reach.
Kobelco SK200: A smaller and lower-cost option for routine excavation, but its 0.8 cubic meter bucket and lower engine output limit production on major projects.
Kobelco SK380: Provides a 38.5-ton platform, 252 kN bucket force, 609-liter-per-minute hydraulic flow, and a 1.9 cubic meter bucket for heavy production work.

Final Verdict

Rated 5 stars, the Kobelco SK380 is a high-output medium excavator within the AED 490,000–700,000 range. Its powerful hydraulic system, large bucket, long digging reach, and strong traction make it a practical choice for quarries, bulk excavation, deep foundations, and major earthmoving projects where production matters more than transport simplicity.

1.9 cu m Bucket capacity
209 kw Gross power
7,560 mm Max digging depth
11,260 mm Max digging reach
7,370 mm Max dump height
38,500 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 5

Market average

AED 700,000

Starting from

AED 490,000
See owner ratings

Medium excavators. For sale.

05

Cat M318 Wheel excavators
2011-2021

Generation-حفارات بعجلات كاتربيلر M318-cover

The Cat M318 combines the excavation capability of a 17.5-ton machine with 37 kph road travel for utility, municipal, and roadwork applications. Compared with the Volvo EW160, it offers a closely matched wheel-excavator package with strong bucket force, a 9.6 m working reach, and practical mobility between nearby job sites.

Overview

The Cat M318 (M318D) (2011–2021) is a 17.5-ton wheel excavator aimed at contractors, municipalities, and utility teams that need full-size digging performance with better road mobility than a crawler excavator. Its 130 kilowatt Cat C6.6 ACERT engine, 0.91 cubic meter bucket, 6.36 m digging depth, and 9.6 m reach make it suitable for drainage, utility installation, road maintenance, loading, trenching, and urban excavation.

Expert rating: 5 stars

Pros Strong digging forces and long working reach, with 37 kph travel speed for efficient movement between nearby sites.
Cons Less suitable for very soft ground than a tracked excavator, with higher tire-related ownership costs.

Performance & Efficiency

The 130 kilowatt Cat C6.6 ACERT engine supports a hydraulic pump flow of 290 liters per minute at a relief pressure of 350 bar. Its 126 kN bucket digging force and 102 kN arm crowding force provide strong breakout performance for trenching, loading, and compacted ground, while the 9.8 rpm swing speed supports steady excavation cycles. A 99 kN drawbar pull and 25-degree gradeability help the machine work across sloped sites, while the 37 kph travel speed is a major advantage for road and municipal work.

In Comparison

Volvo EW160: A close alternative in the same road-mobile excavator class, suited to utility, municipal, and general construction work.
Cat M318: Provides a 9.6 m digging reach, 126 kN bucket force, and 37 kph travel speed for buyers who need strong excavation output with practical road mobility.

Final Verdict

Rated 5 stars, the Cat M318 is a capable wheel excavator within the AED 180,000–400,000 range. Its strong hydraulic system, 0.91 cubic meter bucket, long digging reach, and high road speed make it a practical choice for roadworks, utilities, drainage, and urban excavation.

2.79 m Boom length
130 kw Gross power
6,360 mm Max digging depth
9,600 mm Max digging reach
7,300 mm Max dump height
17,500 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 6

Market average

AED 400,000

Starting from

AED 180,000
See owner ratings

Wheel excavators. For sale.

06

Hitachi ZX470LC Large excavators
2015-2016

Generation--cover

The Hitachi ZX470LC combines a 50.26-ton operating weight, 286 kN bucket digging force, and a 2.34 cubic meter bucket for bulk excavation, quarry work, and heavy loading. Compared with the Cat 349 and Komatsu PC450, it offers a competitive large-excavator package with deep digging capability, strong hydraulic output, and useful traction for demanding sites.

Overview

The Hitachi ZX470LC (ZX470LC-6) (2015–2016) is a 50.26-ton large excavator aimed at quarry operators, major contractors, mining support fleets, and earthmoving companies that require deep digging capability and high hydraulic output. Its 270 kilowatt turbocharged Isuzu 6UZ1 engine, 2.34 cubic meter bucket, 9.1 m digging depth, and 12.49 m reach make it suitable for bulk excavation, deep foundations, quarry production, loading large trucks, demolition preparation, and major site-development work.

Expert rating: 5 stars

Pros Strong digging forces, deep working range, and high hydraulic flow support demanding production work.
Cons Heavy transport, fuel use, and undercarriage costs make it unsuitable for smaller routine projects.

Performance & Efficiency

The 270 kilowatt Isuzu 6UZ1 turbocharged engine supports a hydraulic pump flow of 800 liters per minute at a relief pressure of 319 bar. Its 286 kN bucket digging force and 210 kN arm crowding force provide strong breakout performance in dense soil and heavy excavation, while the 329 kN drawbar pull and 35-degree gradeability support movement across difficult ground. The 9.5 rpm swing speed maintains steady loading and excavation cycles despite the machine’s 50.26-ton operating weight.

In Comparison

Cat 349: A closely matched large excavator for quarry, demolition, and bulk earthmoving work, with a strong production-focused platform and broad support network.
Komatsu PC450: A comparable heavy excavator suited to deep excavation and truck loading, with similar transport and operating-cost considerations.
Hitachi ZX470LC: Combines a 2.34 cubic meter bucket, 286 kN bucket force, 12.49 m reach, and 800-liter-per-minute hydraulic flow for demanding production applications.

Final Verdict

Rated 5 stars, the Hitachi ZX470LC is a capable large excavator within the AED 300,000–550,000 range. Its deep digging range, strong hydraulic system, high digging forces, and substantial traction make it a practical choice for quarries, major foundations, bulk excavation, and large earthmoving projects where production justifies the higher transport and operating costs.

2.34 cu m Bucket capacity
270 kw Gross power
9,100 mm Max digging depth
12,490 mm Max digging reach
7,030 mm Max dump height
50,260 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 4

Market average

AED 550,000

Starting from

AED 300,000
See owner ratings
07

Volvo EW160 Wheel excavators
2012-2016

Generation--cover

The Volvo EW160 combines a 17.2-ton operating weight, 9.8 m digging reach, and 35 kph travel speed for municipal, utility, and roadwork applications. Compared with the Cat M318, it provides slightly longer reach and a closely matched mobile-excavator package, while the Cat carries higher stated engine power and bucket digging force.

Overview

The Volvo EW160 (EW160D) (2012–2016) is a 17.2-ton wheel excavator aimed at contractors, municipalities, and utility teams that need full-size excavation capability with better road mobility than a crawler excavator. Its 115 kilowatt Volvo D6H engine, 0.76 cubic meter bucket, 6.2 m digging depth, and 9.8 m reach make it suitable for drainage, utility installation, road maintenance, trenching, loading, and urban excavation.

Expert rating: 5 stars

Pros Long digging reach and strong hydraulic flow, with 35 kph travel speed for movement between nearby sites.
Cons Lower bucket force than the Cat M318 and less traction than a tracked excavator on soft ground.

Performance & Efficiency

The 115 kilowatt Volvo D6H engine supports a hydraulic pump flow of 270 liters per minute at a relief pressure of 325 bar. Its 112 kN bucket digging force and 77 kN arm crowding force provide practical breakout performance for trenching, drainage, and loading, while the 10 rpm swing speed supports steady excavation cycles. A 100 kN drawbar pull and 35-degree gradeability help the machine work across sloped sites, and the 35 kph travel speed reduces transport delays during municipal and roadside work.

In Comparison

Cat M318: Provides higher stated engine power and bucket digging force, along with a slightly higher maximum travel speed.
Volvo EW160: Offers a slightly longer digging reach, a closely matched operating weight, and practical road mobility for utility and municipal applications.

Final Verdict

Rated 5 stars, the Volvo EW160 is a capable wheel excavator within the AED 200,000–350,000 range. Its long working reach, strong hydraulic system, road speed, and manageable 17.2-ton operating weight make it a practical choice for drainage, utilities, road maintenance, and urban excavation.

3.2 m Boom length
115 kw Gross power
6,200 mm Max digging depth
9,800 mm Max digging reach
5,970 mm Max dump height
17,200 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 4

Market average

AED 350,000

Starting from

AED 200,000
See owner ratings

Wheel excavators. For sale.

08

Hyundai R220 Medium excavators
2023-2026

Generation--cover

The Hyundai R220 combines a 22-ton operating weight, 154.3 kN bucket digging force, and a 1.2 cubic meter bucket for general construction and medium-scale earthmoving. Compared with the Cat 323 and heavier Hitachi ZX330, it offers strong hydraulic output and digging performance in a more manageable working package.

Overview

The Hyundai R220 (R220LS) (2023–2026) is a 22-ton medium excavator aimed at contractors and earthmoving fleets that need useful digging forces, strong hydraulic flow, and manageable transport requirements. Its 110 kilowatt Cummins 6BTAA-5.9C engine, 1.2 cubic meter bucket, 6.22 m digging depth, and 9.5 m reach make it suitable for foundations, trenching, loading, road construction, utility work, and general site development.

Expert rating: 5 stars

Pros High hydraulic flow and strong digging forces, with a practical 1.2 cubic meter bucket for daily production.
Cons Less digging depth and working reach than heavier 30-ton excavators such as the Hitachi ZX330.

Performance & Efficiency

The 110 kilowatt Cummins 6BTAA-5.9C engine supports a hydraulic pump flow of 440 liters per minute at a relief pressure of 323.6 bar. Its 154.3 kN bucket digging force and 123.3 kN arm crowding force provide strong breakout performance for compacted ground, trenching, and loading, while the 206.9 kN drawbar pull and 35-degree gradeability help the machine work across difficult terrain. The 11 rpm swing speed supports quick and controlled excavation cycles.

In Comparison

Cat 323: A close alternative in the same general working class, suited to foundations, loading, trenching, and general earthmoving.
Hitachi ZX330: A heavier machine with greater digging depth and operating mass, but it requires more demanding transport and site access.
Hyundai R220: Provides a balanced 22-ton platform with 440-liter-per-minute hydraulic flow, a 1.2 cubic meter bucket, and strong digging forces for general contracting work.

Final Verdict

Rated 5 stars, the Hyundai R220 is a capable medium excavator within the AED 180,000–310,000 range. Its Cummins engine, strong hydraulic output, useful bucket capacity, and manageable operating weight make it a practical choice for foundations, roadwork, utilities, loading, and medium-scale excavation.

1.2 cu m Bucket capacity
110 kw Gross power
6,220 mm Max digging depth
9,500 mm Max digging reach
6,635 mm Max dump height
22,000 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 4

Market average

AED 310,000

Starting from

AED 180,000
See owner ratings
09

Hitachi ZX330 Medium excavators
2011-2026

Generation--cover

The Hitachi ZX330 combines a 32.2-ton operating weight, 140 kN bucket digging force, and a 7.38 m digging depth for heavy construction and earthmoving work. Compared with the lighter Cat 323 and closely matched Kobelco SK350, it offers strong reach, quick swing performance, and a durable working package for demanding sites.

Overview

The Hitachi ZX330 (ZX330LC-3) (2011–2026) is a 32.2-ton medium excavator aimed at contractors, quarry operators, and earthmoving fleets handling bulk excavation, foundations, loading, trenching, and major site preparation. Its 110 kilowatt turbocharged Isuzu AH-6HK1X engine, 0.9 cubic meter bucket, 7.38 m digging depth, and 9.86 m reach provide a practical working package for demanding construction and production work.

Expert rating: 5 stars

Pros Deep digging capability and quick swing speed, with strong traction for difficult site conditions.
Cons The 0.9 cubic meter bucket limits loading output compared with some excavators in the same weight class.

Performance & Efficiency

The 110 kilowatt Isuzu AH-6HK1X turbocharged engine supports a hydraulic pump flow of 205 liters per minute at a relief pressure of 350 bar. Its 140 kN bucket digging force and 106 kN arm crowding force provide steady breakout performance for trenching and compacted ground, while the 205 kN drawbar pull and 35-degree gradeability support movement across difficult terrain. The 11.5 rpm swing speed helps maintain quick excavation and truck-loading cycles.

In Comparison

Cat 323: A lighter alternative that is easier to transport and well suited to general construction, but it offers less operating weight than the Hitachi ZX330.
Kobelco SK350: A closer match in operating class, suited to heavy excavation, quarry support, and high-volume earthmoving.
Hitachi ZX330: Combines a 32.2-ton platform, 7.38 m digging depth, and 11.5 rpm swing speed for demanding excavation and loading work.

Final Verdict

Rated 5 stars, the Hitachi ZX330 is a capable medium excavator within the AED 75,000–290,000 range. Its deep digging capability, turbocharged Isuzu engine, strong drawbar pull, and quick swing speed make it a practical choice for foundations, bulk excavation, quarry support, and major site-development work.

0.9 cu m Bucket capacity
110 kw Gross power
7,380 mm Max digging depth
9,860 mm Max digging reach
7,140 mm Max dump height
32,200 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 4

Market average

AED 290,000

Starting from

AED 75,000
See owner ratings
10

Komatsu PC195 Medium excavators
2010-2026

Generation--cover

The Komatsu PC195 combines a 19.5-ton operating weight, 123 kN bucket digging force, and a 0.93 cubic meter bucket for general construction and medium-scale excavation. Compared with the similarly sized Kobelco SK200 and substantially heavier Kobelco SK380, it offers a manageable working package with strong hydraulic flow and deep digging capability.

Overview

The Komatsu PC195 (PC195LC-8) (2010–2026) is a 19.5-ton medium excavator aimed at contractors who need useful digging depth, strong hydraulic output, and manageable transport requirements. Its 97 kilowatt turbocharged Komatsu SAA4D107E-1 engine, 0.93 cubic meter bucket, 7.33 m digging depth, and 7.235 m reach make it suitable for foundations, trenching, utility installation, loading, road construction, and general site development.

Expert rating: 5 stars

Pros Deep digging capability and strong hydraulic flow, with wide tracks for stable site performance.
Cons Modest arm crowding force and bucket capacity limit production compared with heavier excavators.

Performance & Efficiency

The 97 kilowatt Komatsu SAA4D107E-1 turbocharged engine supports a hydraulic pump flow of 439 liters per minute at a relief pressure of 373 bar. Its 123 kN bucket digging force and 79.4 kN arm crowding force provide practical breakout performance for trenching, foundations, and compacted soil. The 178 kN drawbar pull and 35-degree gradeability support movement across uneven ground, while the 12 rpm swing speed helps maintain responsive excavation and loading cycles.

In Comparison

Kobelco SK200: A closely matched alternative in operating weight and general application, with a smaller bucket but similar suitability for routine construction work.
Kobelco SK380: A substantially heavier and higher-output excavator with greater bucket capacity and digging force, but it requires more transport capacity, working space, and fuel.
Komatsu PC195: Provides a manageable 19.5-ton platform with deep digging capability, 439-liter-per-minute hydraulic flow, and wide 800 mm tracks for general contracting work.

Final Verdict

Rated 5 stars, the Komatsu PC195 is a capable medium excavator within the AED 200,000–420,000 range. Its deep digging capability, strong hydraulic system, responsive swing speed, and manageable operating weight make it a practical choice for foundations, utilities, trenching, loading, and medium-scale site development.

0.93 cu m Bucket capacity
97 kw Gross power
7,330 mm Max digging depth
7,235 mm Max digging reach
7,000 mm Max dump height
19,500 kg Operating weight
See full spec & review

Makana rating

Owner rating

 | 5

Market average

AED 420,000

Starting from

AED 200,000
See owner ratings

Related machinery rankings

Top 10 large excavators Top CAT excavators Top medium excavators Best mini excavators for tight space Best mini excavators 10 Best excavators 2025 Top mini excavators by maximum digging depth Top mid-size excavators by max reach Top micro-excavators for tight-space utility digging Best Mini Excavators Mini Excavators 5.5-Ton Mini Excavators for Gardens Mini Excavators with Zero Tail Swing

Best Excavators FAQ.

The Hitachi ZX350 ranks first. Using the current ZX350-7G as reference, it combines 200 kW of power, 31.9–34.1-ton operating weight, 246 kN bucket digging force, modern monitoring, remote diagnostics, and improved fuel efficiency.

The Volvo EC480 and Hitachi ZX470LC are the strongest heavy-production machines here. The EC480E weighs up to 53.3 tons with buckets up to 3.3 m³, while the ZX470LC-7 weighs about 49.1 tons and produces 295 kW.

The Doosan DX300LC family is one of the strongest efficiency-focused options in the ranking. The current DX300LC-7K platform specifically focuses on lower fuel consumption and improved hydraulic efficiency while producing 202 kW in the 30-ton class. The Hitachi ZX350-7G also targets reduced fuel use through its updated engine and hydraulic system.

The Cat M318 is the strongest choice when frequent movement between work areas matters. It reaches 35 km/h, produces 129 kW, and supports a wide range of hydraulic attachments without requiring crawler transport for short moves between nearby sites.

Choose a crawler excavator when traction, digging stability, heavy excavation, and rough-ground performance matter most. Choose a wheeled excavator such as the Cat M318 or Volvo EW160 when road mobility, reduced surface disturbance, and fast movement between nearby work areas are more important. Both reach up to 35 km/h.

Get the latest from Makana

Subscribe to receive auction dates, exclusive deals, and news in your inbox.

We care about the protection of your data. Read ourPrivacy Policy
trustpilot-logo Trusted platform
4.0
google logo Over +175 reviews
4.8
Makana logo

Makana connects quality machinery with the global market, ensuring safe transactions for buyers and sellers.

CompanyAbout usMachinery auctionsWatch showsNewsDocumentation
Book a demo
HELP AND SUPPORTContact usCustomer reviewsHow to sellFinancingInstallmentsFAQ
LEGALPrivacy PolicyTerms & Conditions
© 2026 Makana. All rights reserved.

build datetime: 8/30/2026, 6:54:13 AM